Picture of 1/2 NPTF P.O. Check w/ Manual Release

1/2 NPTF P.O. Check w/ Manual Release

NGT’s B810M is a standard pilot operated check valve that locks pneumatic devices in position. The B810M has 1/2 NPTF in/out ports and 1/4 NPTF pilot port, standard temperature seals, and an extended manual release. The B810M also can accommodate as low as 40 psi pilot pressure.
  • NGT’s PO checks can be used in any pneumatic application where a sudden drop in pressure would harm personnel, damage products, or otherwise hinder the manufacturing process
  • Typical applications of PO checks are clamping, work holding, & lifting equipment, doors, platforms, and material
  • Air tight design means little to no leaking. Design tightens with increased pressure
  • All aluminum o-ring grooves and faces are hard coat anodized with Teflon coating to reduce wear and increase seal life
  • Nickel plated steel piston rod for strength and corrosion resistance
Choose Your Configuration
$0.00
Request Catalog Find A Distributor
Product Drawing for 1/2 NPTF P.O. Check w/ Manual Release
Product Figures for 1/2 NPTF P.O. Check w/ Manual Release
Product Schematic for 1/2 NPTF P.O. Check w/ Manual Release
Application & Function

NGT’s B810M is a standard pilot operated check valve that locks pneumatic devices in position when a pressure drop or total loss of pressure occurs. The B810M has 1/2 NPTF in/out ports and 1/4 NPTF pilot port, standard temperature seals, and an extended manual release. The B810M also can accommodate as low as 40 psi pilot pressure. The B810M valve locks air in the device (such as a cylinder or gripper) until the pilot signal is energized, at which time the valve opens and evacuates the device.

Technical Specs
Flow Capacity: 3.8
Max. Pressure: 150
Pilot Port: 1/4 NPTF
Port Size In: 1/2 NPTF
Port Size Out: 1/2 NPTF
Document: -B81XX.docx
Type: Single PO Check
Adjustable Pilot Pressure: False
Flow Control: False
Counterbalance: False
Is it Swivel: False
Material: Standard
TraceParts Model: 90-27042021-037962