3/8 BSPP P.O. Check w/ Manual Release and High Temp Seals


NGT’s BG6M0MV is a standard pilot operated check valve that locks pneumatic devices in position. The BG6M0MV has 3/8 BSPP in/out ports and 1/8 BSPP pilot port, high temperature seals, and an extended manual release. The BG6M0MV also can accommodate as low as 40 psi pilot pressure.
  • NGT’s PO checks can be used in any pneumatic application where a sudden drop in pressure would harm personnel, damage products, or otherwise hinder the manufacturing process
  • Typical applications of PO checks are clamping, work holding, & lifting equipment, doors, platforms, and material
  • Air tight design means little to no leaking. Design tightens with increased pressure
  • All aluminum o-ring grooves and faces are hard coat anodized with Teflon coating to reduce wear and increase seal life
  • Nickel plated steel piston rod for strength and corrosion resistance
Choose Your Configuration
$0.00
Product Drawing for 3/8 BSPP P.O. Check w/ Manual Release and High Temp Seals
Product Figures for 3/8 BSPP P.O. Check w/ Manual Release and High Temp Seals
Product Schematic for 3/8 BSPP P.O. Check w/ Manual Release and High Temp Seals
Application & Function

NGT’s BG6M0MV is a standard pilot operated check valve that locks pneumatic devices in position when a pressure drop or total loss of pressure occurs. The BG6M0MV has 3/8 BSPP in/out ports and 1/8 BSPP pilot port, high temperature seals, and an extended manual release. The BG6M0MV also can accommodate as low as 40 psi pilot pressure. The BG6M0MV valve locks air in the device (such as a cylinder or gripper) until the pilot signal is energized, at which time the valve opens and evacuates the device.

Technical Specs
Flow Capacity: 2.6
Max. Pressure: 150
Pilot Port: 1/8 BSPP
Port Size In: 3/8 BSPP
Port Size Out: 3/8 BSPP
Document: -BG6MXX-1.docx
Type: Single PO Check
Adjustable Pilot Pressure: False
Flow Control: False
Counterbalance: False
Is it Swivel: False
Material: Standard
TraceParts Model: 90-27042021-037982